Ground Dog Hook Collar

Ground Dog Hook Collar Description

The Hook Collar has been designed to easily attach to the Safety Spring, and the Hook Collar can be used as a locking nut when the ground is too hard. Screw the peg in as far as possible and wind the hook collar to ground level to secure.

Incorporated into the bottom of the Hook Collar is a 19mm socket shape, which can be used as a hand tool if required.

Ground Dogs Hook Collar

Ground Dog Screw in Pegs® and Tuff Dog Screw in Pegs™ use Hook Collars.

The Hook Collar is used to attach the Tie Down Strap to the Safety Spring. The design of the Hook Collar makes it easy to attach to the Safety Spring.

The Hook Collars are bright in colour to draw attention to avoid stubbing of toes.

The hex cut out in the Hook Collar can be used as a hand tool.

Features:

• Fibreglass reinforced nylon
• 19mm hex socket cut out can be used as a hand tool
• Bright Orange - high visibility
• Hook designed to suit Safety Spring
• Light weight

How to use a Ground Dogs Hook Collar:

1. Wind hook collar onto the Ground Dog Screw in Pegs® or Tuff Dog Screw in Pegs™ ensuring that it is not cross-threaded.
2. Drill the Ground Dog Screw in Pegs® or Tuff Dog Screw in Pegs™ into the ground using a 19mm socket, and a left thread setting. 
3. Hook the safety spring around the hook collar.
4. Now tighten the high viz Tie Down Straps.

If the ground is hard, drill the Ground Dog Screw in Pegs® or Tuff Dog Screw in Pegs™ as far as possible, and then wind the hook collar down to the ground level to hold the peg securely.

You can predrill a hole in the ground with a 12mm masonry drill bit if preferred.

Hook Collar
The Hook Collar has been designed with a hook that holds the safety spring firmly.

Hex Head
Ground Dog Screw in Pegs® have a 19mm hex head.

Hook Collar 19mm built in socket
Hook Collars have a built in 19mm socket which fits the Ground Dog Screw in Pegs® complete range. This can be used as a hand tool when you have no drill or hand crank.

Adjustable Locking Nut
The Hook Collar is an adjustable locking nut that can be varied to suit the depth of the ground. This means if you can only get half the peg into the ground, simply winding down the locking nut will make it just as effective, and means you don’t have to have the peg all the way in.

19mm Socket and Drill Adaptor
The Ground Dog screw in pegs have a 19mm hex head, which makes screwing in the pegs easy and fast! The 19mm head fits both the Ground Dog Screw in Pegs™, and the stabilizer legs - this means you only need to carry one size drill socket!